Products
-
2 Core Indoor ABS Face Plate FTTH Fiber Optic Termination Box for Applicable for FTTH Ftto and Fttd Network
Feature：
- One SC or LC adapter interface；
- redundant fiber can be stored inside, easy to use and maintain;
- reversible disk increase the distribution space with clear splicing and wiring , zone, the line crossing is reduced;
- heat or mechanical splicing，Widely used, especially for multi-story and high rise buildings;
- Fully enclosed panel box，additional transparent cover at the outlet to achieve better dustproof effect.
-
GPMB-E China Wholesale High Quality FTTH Fiber Optic socket panel
FTTH Fiber Socket Panel is termination product in FTTH indoor application.
Used in home or work area.
Provide users with optical access or data access. -
Dome 96 Cores Fiber Optic Cable Splice Joint Enclosure
The GPJM3-RS Dome Fiber Optic Splice Closure is used in aerial, wall-mounting applications, for the
straight-through and branching splice of the fiber cable.The closure has four entrance ports on the end (three round ports and one oval port).
The shell of the product is made from ABS.
The shell and the base are sealed by pressing the silicone rubber with clamp allocated.
The entry ports are sealed by heat-shrinkable tube.
The closures can be opened again after be sealed, reused again without changing the sealing material
-
0.7*45mm High Quality Heat Shrink Splice Protector Sleeve for Cable Protection
0.7*45mm High Quality Heat Shrink Splice Protector Sleeve for Cable Protection
The Splice Protection Sleeves is made of 304 stainless steel and PE material.
its used for splicing fiber.
The diamemter is 0.7mm of rod steel.
the length of fiber sleeve is 45mm.
after shrink the OD is 1.5mm±0.01mm.
Sample free,just contact us for sample.
-
FTTH 19″ ODF 48 Core FC Fiber Distribution Frame Fiber Optic Patch Panel
1)Two rack mounting ears with their fixing and mounting screws, allow to be adjusted to different positions
2)19 inch 2 RU cabinet´s front cover or cap, with respectives locks (2)
3) 48 FC / UPC adapters
4) 48 pieces, 1.5 meter pigtails G657A2
5) Black color
6) 19-inch cabinet, 482mm x340.6mm x 88.5mm
7) Cabinet´s sliding rails
8) 2pcs 24 Ports fiber optic splice tray with its cover,4 pcs half spool fiber manager
9) Installation accessories bags (install screw, 48pcs fiber heat shrink sleeve,cable tie)
-
Ribbon Fiber Optical Fusion Splice Protector 12f Double Ceramic Rod
Ribbon Fiber Optical Fusion Splice Protector 12f Double Ceramic Rod is characterized by ability to secure up to 12 fibers in one shield and quickness of assembly (120s).
The sleeve consists of one D-shaped ceramic strengthening element (dimensions 1.9×3.9mm up to 12 fibers).
Fiber Optical Fusion Sleeves are applied in bar fiber-optic cables of the RIBBON type.
-
AI-8C 3 in 1 Fiber Holder Fiber Fusion Splice Machine
AI-8C Fiber Fusion Splicer use the latest core alignment technology with auto focus and six motors
it is a new generation of fiber fusion splicer.
It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects.
The machine uses industrial quad-core CPU, fast response, is currently one of the fastest fiber splicing machine in the market;
with 5-inch 800X480 high-resolution screen, the operation is simple and intuitively;
and up to 300 times focus magnifications, making it is very easy to observe the fiber with naked eyes.
-
270pcs kits 3:1 Dual Wall Heat Shrinkable Tube with Glue
Dual Wall Heat Shrinkable Tube has high temperature shrinkage, soft flame retardant, insulation and corrosion resistance. It is widely used in insulation
protection of various wiring harnesses, solder joints, inductors, and anti-rust and anti-corrosion of metal pipes and rods.This Heat Shrink Tube Kit have difference size that can demand difference wire use.
If you have any insterest,plz dont hesitate to contact us.
-
Factory sales 60*1.0*2.5mm Fiber Optic Cable Protection Sleeve
Fiber splice sleeve is compose of reinforced steel wire, hot melt tube and cross-linked polyolefin. providing SS304 or SS201 strength member and protection to fiber optical splices
It can reconstruct overlay fiber and can provide good mechanical strength at the junction,to ensure good optical transmission properties.
we are factory of Fustion Splice Sleeve and we can provide OEM Service.such as Ribbon sleeve,Fiber sleeve for drop cable,Micro splice sleeve…..
If have any insteres,please feel free to contact us.
-
Micro Fiber Optic Sleeve For 250um bare fiber
Micro Optical Fiber Sleeve is Suitable for bare optical fibers with a diameter of 250 µm.designed specifically for use in optical splitter/coupler or similar packages, with an after shrink diameter of 1.4mm.
-
Manual of GPJ-(04)6 fiber optic splice closure
Choose the cable loop with proper outer diameter and let it go through the optical cable. Peel the cable , take off the outer and inner housing, as well as loose contract tube, and wash off the filling grease, leaving 1.1~1.6mfiber and 30~50mm steel core.
Fix the cable pressing card and cable, together with cable reinforce steel core. If the diameter of the cable is less than 10mm, first bind the cable fixing point with adhesive tape till the diameter has reached 12mm, then fix it.
-
GPJM5-RS Fiber splice enclosure
The GPJM5-RS Dome Fiber Optic Splice Closure is used in aerial, wall-mounting applications, for the straight-through and branching splice of the fiber cable. The closure has five entrance ports on the end (four round ports and one oval port). The shell of the product is made from ABS. The shell and the base are sealed by pressing the silicone rubber with clamp allocated. The entry ports are sealed by heat-shrinkable tube. The closures can be opened again after be sealed, reused again without changing the sealing material.
